Pictures show
Pictures show

Company news


Quality-the basic starting point for market expansion

Click on the quantity:5424Published time:2019-12-03 14:56:03

With the rapid development of China's economy, the living standards of the people have greatly improved, which has given the security industry a very good opportunity for development; the security awareness of the people has become increasingly strong, and the former passive acceptance has changed to the current active requirements, making the security industry Development is not only reflected in quantity, but also in quality.

Due to the continuous development of the industry, people's requirements for security products are not simply monitored, and further debugging is required to obtain the best image effects; at the same time, the quality of employees in the security industry has continued to improve, and it has been from the very beginning. Simple installation has evolved to the point where professional commissioning, maintenance and even simple repairs can now be performed. So this requires the manufacturer of the camera to consider the convenience of installation and commissioning by the end user when designing the product. Hangzhou Dingbiao Digital Technology Co., Ltd. has been committed to the development and application of products in this area, taking the lead in launching adjustable-camera cameras outside the security industry; in 2011, the company took the lead in developing a simple and diverse combination of building block cameras. The technological reforms of China will definitely play the horn of a new round of market structure change. Hangzhou Dingbiao Digital Technology Co., Ltd. has undoubtedly been ahead of its peers and has become a tide of reform.

Our company has always taken quality as the basic starting point for market development. In order to ensure the quality of the cameras produced by our company, the company's quality personnel must go through four inspections of all our products: 1. Raw material inspection; 2. Semi-finished product inspection; 3. Finished product inspection; 4. Factory inspection: Three aging: 1 Aging of incoming materials; 2. Aging of semi-finished products; 3. Aging of finished products. Through the above-mentioned series of tests, we can ensure that the customer's requirements for the company's product quality are met.

I. Inspection of raw materials and aging

Incoming component detection: test capacitors, resistors, inductors, triodes, etc., and perform ultrasonic cleaning to avoid white fog and short circuits on the glass after the camera works. After cleaning all the movements, power boards, and light boards, they must be aged for 8 hours in a professional high and low temperature box under high temperature of 70 degrees and low temperature of -50 degrees to ensure the stability of the movement, power board and lamp board. Unqualified original parts are never used for assembly.

二. Testing and aging of semi-finished products

All the movements, power boards, and light boards will be assembled into semi-finished products after aging. After passing the full inspection of the quality department, the semi-finished products will be aged before they can be used for production.

  three. Finished product inspection and aging

Rain test: All waterproof cameras need to go through a spray system to simulate a rainstorm environment.

Water immersion test: Some waterproof cameras need to go through a 2-hour water immersion test to evaluate the waterproof performance of the camera.

High voltage test: All products with AC220V input must be subjected to high voltage test (4500V, 3S, 10mA) to ensure that there is no leakage and make customers absolutely safe to use

Aging of the whole machine: All products must be aged for 8 hours at room temperature before being shipped from the factory before passing the test.

High temperature aging: The company's quality center regularly performs high temperature aging on the product (50 hours aging with electricity for 4 hours).

24: General inspection of the whole machine

All products of the company must be strictly inspected before leaving the factory (test clarity, infrared effect, various performance parameters) must meet company standards before shipment.

Technical characteristics of our products:

  One. Dual filter switching

At present, various types of surveillance cameras on the market will cause color cast, whitening, and out of focus when monitoring the captured image during the day. Our company has adopted a stable high-quality filter automatic switcher method on the CCD chip to correct the problem of color cast and out of focus, so that the captured image is not out of focus, no color cast, and it can filter strong light to make the color of the screen more Gentle, to achieve consistent human visual color.

2, adjustable outside the lens

The lens is prominent, which completely solves the problem of infrared reflection, and the image is clearer. Unscrew the lens cover can easily adjust the focus, and the project construction is more convenient.

Three, high line and low light

1.E series adopts Effio-E DSP (CXD4127GG) solution developed by SONY (2010) newly launched new platform and SONY1 / 3 Exview HAD II TM CCD, the minimum illumination is 0.003LUX, the resolution can reach color 650TVL, black and white 700TVL Dark area compensation and backlight compensation, strong light suppression function, can shoot clear and true images under the difference between indoor low light and strong outdoor light

2. The A and C series use the latest generation CCD of Sony supper HAD CCD II, the sensitivity is increased by 2 times, the minimum illumination of the A series is 0.03 ns, and the C series is 0.01 ns; truly high definition, A series The resolution can reach 540TVL, 470K pixels. With the latest generation of SONY DSP, the use temperature is reduced, the accuracy and dynamic range of digital-to-analog conversion and the degree of color reproduction are improved. From the above points, we can see the effects that can be achieved with this new generation of CCD cameras. Even at night, the camera can still obtain high-definition image quality through a faint light source. With the use of our filter switching components, the day and night picture can be almost perfect.

Four, double plate movement

Adopt SONY standard design, the core board uses the front and rear dual boards. The front board is mainly used for video capture, and the rear board is mainly used for image processing. The perfect design, high stability and more reasonable structure.

V. Constant current and constant voltage

PROTIPRO camera is the first in the industry to propose the use of a separate power supply for infrared cameras. The power and video are separated so that high voltages will not interfere with the video imaging effect.

六 、 Anti-fog

At present, all kinds of surveillance cameras on the market will appear fogging. The company found the problem through repeated experimental research. All of our products have undergone special treatment to completely solve the fogging phenomenon.

Infrared lens

  1. The infrared lens used by our company has different light path designs (spectral range 400-860mm) and different optical paths (different glass slides for accurate imaging); meanwhile, it adopts special coating and mechanical structure to suppress useless light. The lens is not recommended to switch to other brands; nor is it recommended that customers replace it by themselves. To change the lens focal length in engineering, you can only change the whole machine. It is not recommended for customers to focus (because customers may not have a darkroom and other test environments), but if the factory state deviation is large, you can focus in a small range, otherwise it is difficult to adjust the "day and night aberration" to the best state.

  2. Due to the structural characteristics of traditional infrared lenses, a lubricant is required for lubrication during focusing. This lubricant is affected by the principle of thermal expansion and contraction. When the temperature reaches a certain level, this lubricant will volatilize. As a result, the focal length of the lens is not accurate, and the image appears blurred. In order to solve this problem, the company successfully developed a brand new spring lens after long-term research and repeated experiments, which completely solved the phenomenon of the lens out of focus without affecting the normal imaging of the camera.

VIII. Infrared Light

1. The latest generation of array infrared lamps

Uses the highest conversion rate of electro-optical LEDs in the world.The wick and the base are connected in series by double gold wires.The brightness of a single lamp is equivalent to 3-4 times that of ordinary high-power infrared lamps. The above guarantees a longer life of the infrared lamp; a mesh-shaped wick, more uniform light emission, and no flashlight effect; with the special infrared lens, the irradiation angle is convenient and adjustable to achieve the far, middle and near irradiation requirements; cooperate with the company's independently designed The LED constant current drive circuit and high-speed heat dissipation system make the working life of infrared lamps 5 to 10 times that of traditional LEDs.

2.LED Infrared Light

TIPRO Camera Introduction

9 products

Zoom Zoom Night Vision Camera

Infrared gun camera

Infrared dome camera

Infrared manual focus camera

Rugged camera

Starlight Camera

Color ultra low light camera

Ordinary series

Array infrared camera

8 characteristics

Dual filter switching

Adjustable outside the lens

High line infrared low light

Double plate movement

Constant current and constant voltage

Anti-fog

Infrared lens

 Infrared light

3 segments

Absolutely stable product

The most distinctive products

Best price / quality product

We believe that: quality, service and price are the basic starting point for market development and the company's survival philosophy. It can be recognized and satisfied by users. It is the highest purpose of all employees of the company. Products return the love of customers.


Pictures show
Pictures show

 WeChat

Contact us

Contact us

 

Contact number:0571-56886888 56895299

E-mail:8990898@qq.com

Company address:Room 9, Longdu Building, 376 Tianmushan Road, Xihu District, Hangzhou, Zhejiang Province

Hangzhou Dingbiao Technology Co., Ltd.          備案號(hào): 浙ICP備14007535號(hào)